Xiamen Honeycomb Stone Panels Co.,Ltd
Article list

How to install Honeycomb Stone Panels | How to install Stone Honeycomb Panels?

192
Issuing time:2019-05-05 11:46Author:Rody ShuSource:Xiamen Honeycomb Stone Panels Co.,LtdLink:http://www.honeycombstonepanels.com
文章附图





Honeycomb Stone Panels are extensively used for interior and exterior wall cladding for projects. But do you know how to fix and install the Honeycomb Stone Panels?


Stone Honeycomb Panels Installation.jpg


As we known the installation systems for Honeycomb Stone Panels can be Interlock Clip System, Aluminum Plate System and Bolt Nut System etc. Now let's introduce you these three installation systems as below.





Stone Honeycomb Panel-07.jpg                                      Stone Honeycomb Panel-09.jpg                     


(1). Interlock Clip System

Normally the interlock clips for Honeycomb Stone Panels were cut at 4" long each segment, and then each one interlock clip was fixed onto the back side of Honeycomb Stone Panel as per drawing with at least 4 rivets up to 6 rivets. The gear strength of one rivet is about 110 pounds. One Honeycomb Stone Panel needs at least 2 interlock clips at the back side.   That depends on size of the panels, the bigger size Honeycomb Stone Panel is, the more interlock clips needed. Small size Honeycomb Stone Panel only needs 2 interlock clips or more. Once all interlock clips were fixed onto the back side of Honeycomb Stone Panels as per drawings, then just hang up the stone panels onto the interlock rails on wall. Estimated one worker can install about 1000SF Honeycomb Stone Panels onto wall in 8 hours per day on average. This installation is fast, but the cost of interlock clips and interlock rails is high.





Stone Honeycomb Panel-22.jpg           Stone Honeycomb Panel-27.jpg


(2). Aluminum Plate System

This one installation used Aluminum Plates to instead of Interlock Clips on back side. Basically the Aluminum Plates were pre-cut at size 1" x 1" and pre-drill 2 holes in each Aluminum Plate. then use 2 rivets to fix the Aluminum Plate onto back side of Honeycomb Stone Panel. One Honeycomb Stone Panel needs at least 4 Aluminum Plates at 4 corners, then use screws to fasten the Honeycomb Stone Panels onto the steel studs on the wall of the building. The bigger size Honeycomb Stone Panel is, the more Aluminum Plates needed. Estimated one worker can install about 500SF Honeycomb Stone Panels onto wall in 8 hours per day on average. Cost of Aluminum Plate is cheap, but installation of this one system is slow.





Stone Honeycomb Panel-35.jpg               Stone Honeycomb Panel-31.jpg


(3). Bolt Nut System

Theory of this installation is the same as the Interlock Clip System, just use the Bolt Nuts to fix the Interlock Clips to instead of rivets. The Bolt Nuts were pre-inbeded into the Honeycomb Stone Panels in the process, then the Interlock Clips were screwed onto the Bolt Nuts. Cost of this system is also high, but its installation is fast. Estimated one worker can install about 1000SF Honeycomb Stone Panels onto wall in 8 hours per day on average.


Xiamen Honeycomb Stone Panels Co.,Ltd specialized in Honeycomb Stone Panels,Super Thin Stone Panels for commercial and residential projects for years. If you want to know more information about Honeycomb Stone Panels,Please kindly not hesitate to contact with Xiamen Honeycomb Stone Panels Co.,Ltd discuss your options and see how we can help you!


Thank you and hope for our further business cooperation!